- :
Intel Pentium compatible processor (500 MHz minimum, 1 GHz recommended), including VIA, AMD Athlon, Athlon 64, Opteron, Intel® Core™ 2 Duo, Xeon and Celeron processors.
- :
Symmetric Multi-Processor (SMP) support.
- :
128 MBytes minimum to 4 GBytes maximum RAM (additional RAM improves performance). Additional RAM required if either SmoothGuardian or SmoothZap modules are installed (see their System Requirements pages for further information).
- :
A single SCSI, SATA, SAS or IDE disk (4 GBytes minimum) is required. Additional disk space is required if either the SmoothGuardian or SmoothZap modules are installed (see their System Requirements pages for further information).
- :
Optionally two disks of the same type (but can be of different capacity) may be configured for software RAID1 (mirrored disks).
- :
Hardware (SCSI and SAS) RAID systems and controller cards are supported.
- :
Can be used as an alternative to a hard disk (256 MBytes minimum), unless either SmoothGuardian or SmoothZap modules are installed.
- :
An IDE or SCSI CDROM or bootable USB CDROM drive is recommended for software installation (not required after installation).
- :
All common Network Interface Cards are supported including Gigabit and fiber NICs.
- :
Required for software installation but not for subsequent configuration and use (headless operation).
- :
Integral Security Hardened Operating System included.
PLEASE NOTE: If you wish to confirm that the software supports a particular system/hardware component, please
consult our Technical Support Team who will be happy to offer advice and guidance on hardware selection.
|